Snow Joe TRJ609E Operator's Manual download pdf (Page 8)

Starting for the rst time and operation

1. You will need to exert a certain force to pull out the line

when the trimmer is used for the rst time. To do so, press

on the push button (Fig. 9) and pull out the line to the edge

of the guard hood.

2. The line will be cut to the correct length the rst time the

cutting head is started. A short, worn nylon line will result

in poor cutting performance.

3. To restore the correct line length, press the trimmer against

the ground while the cutting head is running.

4. The length of the line will then adjust automatically

(Fig. 10).

Application

Replacing the spool

mWARNING! Unplug the mains supply cable before

changing the trimmer line.

NOTE: A dual-line factory wound spool (Model TRJ609ERS) is

available for easy spool replacement on the TRJ609E electric

grass trimmer. Visit www.snowjoe.com to purchase.

1. Disconnect the main plug.

2. Press together both locking device tabs on the spool cover

and remove the cover (Figs. 11-12).

3. Remove the spool from the spool cover (Fig. 13).

4. Remove the spring and clean out any dirt or grass residue.

Fig. 9

Fig. 10

Fig. 11

Locking devices

Spool cover

Spool

Fig. 12

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Snow Joe TRJ609E Operator's Manual Page 8