Snow Joe TRJ609E Operator's Manual download pdf (Page 3)

Extension Cords

• Make sure your extension cord is in good condition. When

using an extension cord, be sure to use one heavy enough

to carry the current your product will draw. An undersized

cord will cause a drop in line voltage resulting in loss of

power and overheating. Table 1 shows the correct size

to use depending on cord length and nameplate Ampere

rating. If in doubt, use the next heavier gauge. The smaller

the gauge number, the heavier the cord.

• Ground Fault Circuit Interrupter (GFCI) protection should

be provided on the circuits or outlets to be used for this

electric trimmer. Receptacles are available with built-in

GFCI protection and may be used for this measure of

safety.

• Use only UL listed extension cords. Inspect the extension

cord before use and never use damaged or altered

extension cords. Follow the extension cord manufacturer’s

safety instructions.

• To prevent the appliance cord from disconnecting from the

extension cord during operation, use the plug-receptacle

retaining straps provided or make a knot with the two cords

as shown in Table 2.

Table 1. Minimum Recommended Extension Cord Gauge

(AWG) Chart

Table 2. Method of Securing Extension Cord

100

150

Volts

120V

0 – 6

6 – 10

10 – 12

12 – 16

Total length of cord in feet

AWG

(Extension Cord Gauge)

Not Recommended

Ampere Rating

(B) Connect plug and receptacle

Cord set Appliance cord

(A) Tie cord as shown

1 2 3 4 5 6 7 8 ... 11 12

No comments

Snow Joe TRJ609E Operator's Manual Page 3