Snow Joe TRJ609E Operator's Manual download pdf (Page 6)

Assembly

Before assembly, make sure that the tool is switched off and

unplugged.

Fitting the handle

1. Insert the motor housing into the handle until it locks

securely in place (Fig. 1).

2. Secure the handle with the screws provided (Fig. 1).

Fitting the safety guard

mWARNING! The guard must be properly installed. The

guard provides partial protection to the operator and other

bystanders from the risk of thrown objects.

1. Fix the safety guard to the trimmer head, making sure the

sides are located along the grooves on the trimmer head

(Fig. 2).

2. Secure the safety guard onto the trimmer head with the

screws provided (Fig. 3).

Preparing the trimmer for use

Mains supply cable strain relief

1. In order to reduce strain on the cable inlet, form a loop and

hook the cable around the strain relief arm (Fig. 4).

Operation

WARNING! Remove stones, loose pieces of wood

and other objects from the cutting area. The blade continues

to rotate for a few seconds after the trimmer is switched off.

Let the motor come to a complete stop before switching the

trimmer back on. Do not rapidly switch the trimmer off and on.

mCAUTION! Always wear eye protection.

Secure with screws

Fig. 1

Fig. 2

Fig. 3

Screws

Fig. 4

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Snow Joe TRJ609E Operator's Manual Page 6