Snow Joe ION8024-XR Owner's Manual download pdf (Page 8)

Unpacking

Carton Contents:

• Cordless snow blower with lower handle

• Upper handle assembly

• EcoSharp

PRO 40 V 5.0 Ah battery (2)

• EcoSharp

40 V dual port battery charger

• Safety key (2)

• Handle knob (4) + bolt (4)

• Discharge chute assembly

• Chute clean-out tool

• Chute nuts (4)

• Shear bolt (2) + gasket (2) + nut (2) (Extras)

• Hex key

• Manual with registration card

1. Carefully remove the cordless snow blower and check to

see that all of the above items are supplied.

2. Inspect the product carefully to make sure no breakage or

damage occurred during shipping. If you nd damaged or

missing parts, DO NOT return the unit to the store. Please

call the Snow Joe

+ Sun Joe

customer service center at

1-866-SNOWJOE (1-866-766-9563).

NOTE: Do not discard the shipping carton and packaging

material until you are ready to use the cordless snow

blower. The packaging is made of recyclable materials.

Properly dispose of these materials in accordance with

local regulations or save the packaging for long-term

product storage.

IMPORTANT! The equipment and packaging material are

not toys. Do not let children play with plastic bags, foils

or small parts. These items can be swallowed and pose a

suocation risk!

Assembly

mWARNING! To avoid serious personal injury, read and

understand all safety instructions provided.

mWARNING! Unpacking and assembly should be

completed on a at and stable surface, with adequate space

for moving the machine and its packaging.

Tools and supplies required:

• Hex key (included)

• Tire gauge

Assembling the Handles

mWARNING! Observe the lower rear area of the snow

blower and be careful not to damage cable sleeve when

rotating the handle upward.

1. Rotate the handlebars into operating position.

2. Slightly spread the upper handle assembly down over the

lower handle until it slides into position (Fig. 1).

3. Adjust upper handle assembly to the optimal position

by aligning the double bolt holes at the desired height.

Secure the connection using the 4 handle knobs and

bolts, and tighten on each side (Fig. 2).

Fig. 1

Upper

handle

assembly

Spread the

upper handle

Handle

knob +

bolt

Lower

handle

Cable

sleeve

(BACK VIEW)

Fig. 2

3-position

handle

height

adjustment

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 27 28

Comments to this Manuals

No comments

Snow Joe ION8024-XR Owner's Manual Page 8

Comments to this Manuals