Snow Joe ION8024-XR Owner's Manual download pdf (Page 12)

LED Headlights (Fig. 12)

Two LED headlights are located on the front panel. To activate

the LED lights:

1. Press the LED light button on the control panel.

2. The LED lights can be independently adjusted by moving

either up or down to desired angle, as shown.

NOTE: After you have nished using your snow blower,

remember to turn OFF the light switch.

Auger Trigger (Right-Handle) (Fig. 13)

1. Press the safety button, then squeeze the auger trigger

against the right-handle to engage the auger and start

snow throwing action.

2. Release auger trigger to stop.

Drive Trigger (Left-Handle) (Fig. 14)

Squeeze the drive trigger against the left-handle to engage

the wheel drive for propelling unit. Forward speed will vary

according to snow depth and moisture content. Release

trigger to stop movement.

NOTE: When traveling to or from the area to be cleared, press

down on the handle grips enough to raise the front of the

unit slightly o the surface. Engage the drive trigger without

engaging the auger trigger.

Power Switch (Fig. 15)

The power switch is operated with a removable key. The

power switch has two positions: ON and OFF. Always remove

key when unit is unattended.

Safety Switch (Fig. 15)

Rotate the safety switch clockwise and pull up the safety

switch to engage the motors/electronics. Push the safety

switch down to stop all motors/electronics.

Fig. 12

LED Lights

LED Lights button

Fig. 13

Auger trigger (Right-handle)

Safety

button

Auger

trigger

Fig. 14

Drive trigger (Left-handle)

Drive

trigger

OFF

Fig. 15

Key/Power switchSafety switch

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 27 28

Comments to this Manuals

No comments

Snow Joe ION8024-XR Owner's Manual Page 12

Comments to this Manuals