Snow Joe ASHJ201 Owner's Manual download pdf (Page 10)

Troubleshooting

Device does not start Mains voltage is not present Check plug socket, cable, line, plug and

fuse; if damage is found, contact a qualied

electrican to repair

Switch on the equipment (see “Switching

ON/OFF”)

Insert the pleated lter correctly

(see “Cleaning/Maintenance”)

Contact Snow Joe

customer

service to repair

Remove obstructions and blockages

Close the metal container

Empty the metal container (see “Cleaning/

Maintenance”)

Clean or replace the pleated lter

(see “Cleaning/Maintenance”)

Clean the air lter (see “Cleaning/

Maintenance”)

The equipment is not switched ON

Safety stop switch is activated due to missing or

incorrectly inserted pleated lter (Fig. 1, Item 13)

Defective ON/OFF switch (Fig. 1, Item 6)

Defective motor

Suction hose (Fig. 1, Item 11) or suction

tube (Fig. 1, Item 12) is blocked

The metal container (Fig. 1, Item 10) is not closed

The metal container is full

The pleated lter (Fig. 1, Item 13) is clogged

The air lter (Fig. 1, Item 17) is clogged

Low or lack of suction

Problem Possible Cause Possible Solution

1 2 ... 5 6 7 8 9 10 11 12

No comments

Snow Joe ASHJ201 Owner's Manual Page 10